香港志强牌磨刀机,具有磨削精度高、安装方便、造型美观、结构新颖,各转动部位灵活，噪音低、振动小，刀架部分带轴承，耐用、耐磨、操作方便等特点，专门设计用于刃磨刻模铣床、刻字机、刻线机、电脑雕刻机.打标机等各种直径、形状、角度的雕刻尖刀、端铣刀、刻刀和按刻模比例相应的靠模销。因此它是机械加工及雕刻行业刀具刃磨的必备的配套设备。
omnipotent knife sharping of strong hong kong aspiration plate machine, have grinding accuracy is high , installation is convenient , attractive appearance , structure are new and original , every turns location nimbly , noise is low , vibration is small , the tool carrier part brings axle bearing along, characteristics such as durable , able to endure , handling to go to the lavatory , machine , dividing machine , computer sculpturing machine specially, designing that the mill carves the model milling machine being used for edge , carving characters on a seal. since bid machine waits for the various diameter , form , angle, carve the sharp knife , end milling cutter , graver and report back after according to carving corresponding model proportion explorator. it is machine work and the corollary e carving must prepare for that the industry cutter edge grinds therefore.
技术相关参数：
| 型号 | zq380 | ||
| 砂轮尺寸 | 直径φ100mm×厚度50mm×孔径φ20mm | ||
| 主轴转速 | 5200r.p.m | ||
| 弹簧套夹持直径范围 | φ3～φ16mm | ||
| 磨削锥角范围 | 0°～180° | ||
| 磨削负锥角范围 | 0°～52° | ||
| 磨削后角范围 | 0°～44° | ||
| 电机 | 功率 | 0.375kw | 1/2hp |
| 电压（三相） | 380v | ||
| 包装尺寸/毛重 | 60×40×42cm/60kg | ||
标准配置：
| 名 称 | 数量 | 备 注 |
| 白玉钢砂轮 | 1个 | 砂轮粒度80# |
| 磨刀机夹头 | 5只 | φ4、φ6、φ8、φ10、φ12mm |
| 工具 | 1套 | 内六角φ4、φ6、φ8mm |
| 磨刀机皮带 | 1条 | 周长22cm |
| 工作灯 | 1盏 | 灯泡功率220v 35w |
本产品的加工定制是否，种类是磨刀机，品牌是香港志强,其他