原装香港志强磨刀机 雕刻刀研磨机 加工中心高精度磨刀机
香港志强牌磨刀机,具有磨削精度高、安装方便、造型美观、结构新颖,各转动部位灵活,噪音低、振动小,刀架部分带轴承,耐用、耐磨、操作方便等特点,专门设计用于刃磨刻模铣床、刻字机、刻线机、电脑雕刻机.打标机等各种直径、形状、角度的雕刻尖刀、端铣刀、刻刀和按刻模比例相应的靠模销。因此它是机械加工及雕刻行业刀具刃磨的必备的配套设备。
omnipotent knife sharping of strong hong kong aspiration plate machine, have grinding accuracy is high , installation is convenient , attractive appearance , structure are new and original , every turns location nimbly , noise is low , vibration is small , the tool carrier part brings axle bearing along, characteristics such as durable , able to endure , handling to go to the lavatory , machine , dividing machine , computer sculpturing machine specially, designing that the mill carves the model milling machine being used for edge , carving characters on a seal. since bid machine waits for the various diameter , form , angle, carve the sharp knife , end milling cutter , graver and report back after according to carving corresponding model proportion explorator. it is machine work and the corollary e carving must prepare for that the industry cutter edge grinds therefore.
技术相关参数:
型号 | zq380 | ||
砂轮尺寸 | 直径φ100mm×厚度50mm×孔径φ20mm | ||
主轴转速 | 5200r.p.m | ||
弹簧套夹持直径范围 | φ3~φ16mm | ||
磨削锥角范围 | 0°~180° | ||
磨削负锥角范围 | 0°~52° | ||
磨削后角范围 | 0°~44° | ||
电机 | 功率 | 0.375kw | 1/2hp |
电压(三相) | 380v | ||
包装尺寸/毛重 | 60×40×42cm/60kg |
标准配置:
名 称 | 数量 | 备 注 |
白玉钢砂轮 | 1个 | 砂轮粒度80# |
磨刀机夹头 | 5只 | φ4、φ6、φ8、φ10、φ12mm |
工具 | 1套 | 内六角φ4、φ6、φ8mm |
磨刀机皮带 | 1条 | 周长22cm |
工作灯 | 1盏 | 灯泡功率220v 35w |
本产品的加工定制是否,种类是磨刀机,品牌是香港志强,其他
联系方式
- 地址:广东深圳市宝安区沙井镇新和大道38号新亭大厦601室
- 电话:86 0755 27223892
- 联系人:贺建
- 手机:13723784734
- 传真:86 0755 27223893
- Email:shop1438058872816